Tiffin Motorhomes WAYFARER 2021, Руководство пользователя

Страница: 114 / 170

PLUMBING AND BATH FEATURES CONTINUED
WATER PUMP
The water pump is self-priming and totally automatic, operating on demand whenever
water is required. The water pump is used to pressurize the fresh water system when
the unit is not connected to city water.
To start the pump, follow these instructions:
1. Fill or partially fill the fresh water tank supply.
2. Open the kitchen and bathroom faucets.
3. Turn the water pump switch (Figure 106.1) to the "ON" position and allow the
water to fill the water line and the hot water heater.
4. Close each faucet after it delivers a steady stream of water (close the cold water
faucet first). Leave the hot water faucets "ON" until they deliver a steady stream of
water. This procedure will assure that the water heater is filled with water.
5. The water pump should stop running once all the faucets are closed.
6. The water pump is now ready for automatic operation. The pump will run when a
faucet is open and stop when the faucet is closed.
7. Never allow the pump tpo run for long periods of time without water being present
in the supply tank. Doing so may cause physical damage to the components or it
may blow fuses.
Figure 106.1
Water Pump Switch Located in Exterior Rear
Compartment Drivers Side
All the water should be drained from the fresh water system when the unit is not in use for an
extended period of time.
For more detailed information regarding the water pump, one should refer to the water pump
manufacturers brochure located in the Owners Information Package
106