Tiernan TE3000, Инструкция по установке и эксплуатации

Страница: 70 / 114

60 Using a Remote Unit
TCA DEAUTH <label> where label is the
alpha-numeric string
specified in the
TCA Add command
— De-authorizes a Tiernan decoder so that it cannot receive broadcast
signals.
Front panel command equivalent: Config>CA>IRD Cfg>List
TCA DELETE <label> where label is the
alpha-numeric string
specified in the
TCA Add command
— Deletes a Tiernan decoder from the conditional access database.
Front panel command equivalent: Config>CA>IRD Cfg>Delete
TCA ENABLE Off, On Off Enables or disables conditional access for a program. Parameters are:
On = enables PGCA, ensures that only authorized decoders can
receive the broadcast signals. Decoders that are not authorized will
not be able to receive the broadcast signal. Off = disables PGCA, all
decoders, whether authorized or not, can receive the broadcast signal.
Caution: TCA Enable should be set to Off before changing any
TE3000 parameters. Once all configuration changes have been
implemented, TCA Enable can be set to On. Failure to set PGCA to
Off may cause the unit to lock, requiring that the TE3000 be reset.
Front panel command equivalent: Config>CA>Setup>Enable
TCA LIST — — Displays a list of all Tiernan decoders registered in the database. The
list includes the decoder’s label, MAC address, and if the decoder is
authorized.
Front panel command equivalent: Config>CA>IRD Cfg>List
TCA MASK 0 to FF 0 (zero) Sets the PGCA scrambling key to a specified algorithmic table.
Front panel command equivalent: Config>CA>Setup>Scramble Key
TCA UPDATE — — Loads the active subscriber list from the PGCA database.
Front panel command equivalent: none
TCA UR 1 to 60 seconds 15 TCA update rate; specifies how often, in seconds, PGCA information
is transmitted.
VE ATSC_CC On, Off Off Configures the encoder to transmit ATSC closed captioning
information. Parameters are:
!
On = enables ATSC closed captioning
!
Off = does not encode any ATSC closed captioning information
Front panel command equivalent: Config>Service>Video>ATSC CC
VE.<port> BR 1.0 to 15.0 Mbps — Sets the output compressed video bit rate.
This command is query-only when the MC BITRATE_CTL command is
set to Auto.
Front panel command equivalent: Config>Service>Video>Data Rate
VE.<port> CHROMA 4_2_0 4_2_0 Queries the chroma encoding format.
Front panel command equivalent: Config>Service>Video>Chroma
VE.<port> ENABLE On, Off On Setting determines whether or not video is included in the output
transport stream. Parameters are: On = video is included in the output
transport stream; Off = video is not include in the output transport
stream.
Front panel command equivalent: Config>Service>Video>Enable
VE.<port> HRES 352, 480, 544, 704,
720
720 Sets the horizontal pixel resolution; the TE3000 uses this parameter,
as well as the video format parameter, NTSC or PAL, to resize the
picture prior to video encoding.
For all parameters the number of lines per frame are: NTSC = 480;
PAL = 576.
Front panel command equivalent: Config>Service>Video>Resolution
TE3000 Remote Command Descriptions
(continued)
Remote Command Parameter Range Factory
Default
Description