Initial setup steps
1. Connect a pair of speaker cables to the
appropriate binding posts on the rear of the Bond 4.
Then connect the other ends to a pair of passive
speakers. Ensure po and negative – are
matched with the Bond 4 and speakers. (Speaker
cables are not included in the packaging.)
2. Locate the AC/DC power adapter and insert the
end into the power input on the rear panel.
3. Then insert the appropriate UK/EU plug into the
adapter and connect the other end to a main
socket.
4. Turn on the power switch at the socket and you
should hear “Power on – WiFi mode” if the Bond 4
is connected properly to your amp/speakers.
Содержание Bond 4
Страница 1: ...Bond 4 User Guide ...
