9
10
EN | Recipes
Fresh fruit milkshake
Do not process more than the quantities indicated in this
recipe in one go. Let the appliance cool down to room
temperature before you continue processing.
Ingredients:
- 100g bananas or strawberries
- 200ml fresh milk
- 50g vanilla ice cream
- granulated sugar to taste
◆
Peel the bananas or rinse and hull the strawberries.
Cut the fruit into smaller pieces. Put all the ingredients in
the blender jar.
◆
Blend until smooth.
Tip: You can use any fruit you like to make your favourite
fresh fruit milkshake.
Nourishing vegetable soup from Budapest
Ingredients:
- 240g kohlrabi
- 240g potatoes
- 360g celery
- 120g carrots
- water (fill up to 1,5-litre indication)
◆
Put the kohlrabi, potatoes, celery, carrots and water in
the blender in this order. Blend the ingredients for 5 sec-
onds for a coarse soup or longer for a finer result.
- 150g dal (from can)
- 150g smoked pork
- 190g crème fraîche
- 15g parsley
- salt
- fresh pepper
- 1.5 stock cubes
- 2 bay leaves
◆
Put the blended ingredients in a pan and bring to the
boil. Add water, crème fraîche, dal, pork and herbs. Cook
for 30 minutes while stirring constantly.
◆
If you want to prepare a larger quantity of soup, let the
appliance cool down for 60 minutes after processing the
ingredients for each batch.
The motor of the device runs
but cone of the citrus press
does not turn.
Please check if you have inserted the tool holder. citrus press
properly. Please check if you have attached the sieve of the
citrus press properly.(Indication on the sieve points to indication
on the handle of the bowl)
Can I clean all removable parts
in the dishwasher?
Yes, except the motor unit and the protection cap for the blade
unit.
What does ‘pulse’ mean?
When you press the Pulse button, the appliance will run at its
highest speed a s long you keep pressing the button. Using the
Pulse button is recommended if you want to have more control
over the processing job, for instance when you are chopping.
Can I pour boiling hot
ingredients into the blender jar?
No, let the liquids or ingredients cool down to 80°C to avoid
damaging the accessories.
Why does the motor produce an
unpleasant smell during
processing?
It is very common for a new appliance to give off an unpleasant
smell or emit some smoke the first few times it is used .This
phenomenon will stop after you have used the appliance a
number of times. The appliance may also give off an unpleasant
smell or emit some smoke if it has been used too long. In that
case you have to switch the appliance off and let it cool down
for 60 minutes.
What should I do when the blade
unit or motor gets blocked during
processing?
Switch the appliance off and use a spatula to dislodge the
ingredients that block the blade unit. We also recommend
processing a smaller quantity.
What should I do if the blender
leaks?
Switch the appliance off and pour out the ingredients. Then
remove the blade unit interface. Check if the sealing ring has
been assembled properly on the blade unit.
Why does the ice function not
work?
If you want to use the ice button, first turn the control knob to
position ON. Then push the ice button.
