7
8
To use your mill
• Put your ingredients into the jar. Do not fill it more than
half full.
• Fit the sealing ring into the blade unit.
• Turn the blade unit upside down. Lower it into the jar,
blades down.
• Screw the blade unit onto the jar until it is finger tight.
• Place the mill onto the power unit and turn to lock.
• Switch on to maximum speed or use the pulse control.
• After milling, you can replace the blade unit with the
sprinkler lid
• and shake out your food.
• The sprinkler lid is not airtight.
EN | Cleaning
- Always unplug the appliance before you remove acces-
sories or clean the motor unit.
- You can quickly and easily pre-clean the food processor
bowl and blender jar with the pulse button. Simply add
some water and washing-up liquid to the dirty bowl or jar
and secure the lid. Then use the pulse button until the
bowl or jar is clean. When you pre-clean the food proces-
sor bowl in this way, make sure the food processor blade
is assembled in the bowl.
EN | Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Choosing a speed for all functions
EN | Troubleshooting
Tool/
Attachment
Picture
Function
Speed Maximum
capacities
KB time
Rest
time
Empty
working
KB time
Knife Blade
Chopping meat
Cutting vegetables
Min. –
Max.
500g
30sec
1min.
30sec
Dough took
(plastic
knife)
Dough making
Dough kneading
Min.
500g flour
280ml
water
30sec
1min.
30sec
Discs -
slicing/
shredding/
chipping/
Slicing/ shredding/
chipping food and
vegetables such as
as Carrots, Cheese,
Cucumber, etc
Mid. –
Max.
1200ml
1min.
2min.
30sec
Question
The appliance does not go on.
Make sure that all assembly indications (on the lid of the bowl, on
the bowl, on the blender jar and on the motor unit) are aligned.
Answer
The appliance suddenly stops
running.
The lid of the bowl may have become undone during a heavy
processing job. Close the lid properly. The appliance immediately
starts working again. The processing job is too heavy. Set the
control knob to OFF to switch off the appliance and remove the
mains plug from the wall socket. Then let the appliance cool down
to room temperature. lug in the appliance and switch it on again.
Process smaller batches.
