Ti Lite ZR Скачать руководство пользователя | Manualshive

Страница: 53 / 89

background image

7-3

ZR Owner’s Manual

OM0005_Rev A_ZR

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

Replacing

1. Lift the back lap to expose the backrest ears. See Figure 7-5.

2. Completely detach the backrest ears and the strap(s) from the padded back and remove them from the backrest.

Note:

If your chair has Integrated or Fold-Down Push Handles, you will need to remove the bolts that secure the

backrest ears to the backrest (using a 1/8” Allen wrench) and the bolts that secure the backrest posts inside the
backrest (using a 5/32” Allen wrench). See Figure 7-3 and see “Adjusting the Backrest Height” on page 4-2.

3. Remove the seat cushion.

4. Detach the bottom lap from the seat upholstery at the underside of the seat upholstery.
5. Attach the bottom lap of the new back upholstery to the seat upholstery at the underside of the seat upholstery

6.  Install the new backrest ears on the backrest.
7.  Adjust to the desired tautness. See “Adjusting the Tension” on page 7-2.
8.  Align the top of the padded back with the backrest ears.
9.  Reinstall the strap(s) and adjust to the desired tautness.

10. Securely attach the padded back to the backrest ears and lower the back lap back into position in front of the

rigidizer bar.

11. Replace the seat cushion.

Figure 7-5
Replacing

Padded Back

Back Flap

Backrest

Bottom Flap

Ear Straps

Backrest Ears

Corbac

®

Adjustable Contour Back Support

For information regarding the use and adjustment of the Corbac

®

Adjustable Contour Back Support, consult the

owner’s manual provided by the manufacturer, Ride Designs.

Tension Adjustable By Straps Seat Sling Upholstery

I

WARNING

Do not make the tension of the seat sling upholstery so loose that it does not properly support your weight. You
must never permit the sling to become so loose that your weight is borne by the crosstube below the seat sling. See
Figure 7-6.

If you ignore this Warning, you may develop pressure sores, which can be a life-threatening medical

complication.

Adjusting the Tension

1. Remove the seat cushion.
2. Detach the back upholstery from the seat upholstery (see “Velcro

®

-Style Adjustable Back Upholstery” on page 7-1

or “Tension Adjustable by Straps Back Upholstery” on pages 7-2 and 7-3).

3. Carefully tip the chair back until it is resting on its rear wheels and the backrest.
4. Detach one tension adjustable strap, adjust to the desired tension and refasten the strap. See Figure 7-6.

«
...
51
52
53
54
55
...
»

Содержание ZR


























































































Отзывы:

Нет отзывов

Похожие инструкции для ZR

Бренд: Jenx Страницы: 24

Quickie Revolution

Бренд: Quickie Страницы: 47

Бренд: Drive DeVilbiss Healthcare Страницы: 40

Бренд: Karma Страницы: 44

LOOK Transfer Bench 1475

Бренд: PARSONS ADL Страницы: 2

Бренд: Handicare Страницы: 52

Бренд: Sunrise Medical Страницы: 18

Бренд: AAT Страницы: 44

Бренд: R82 Страницы: 119

Бренд: Q'STRAINT Страницы: 24

Бренд: Q'STRAINT Страницы: 32

Бренд: Royale Страницы: 3

Anchor Bath Chair

Бренд: Circle Specialty Страницы: 4

Бренд: BCP Страницы: 4

Бренд: Drive Страницы: 7

Бренд: Drive Страницы: 13

INQLINE SECUREMENT

Бренд: Q'STRAINT Страницы: 28

Бренд: Merits Health Products Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды