manualshive.com logo in svg

Ti Lite Aero R, Руководство пользователя

Поделиться
Скачать
Ti Lite Aero R Скачать руководство пользователя страница 90

12-3

Aero R Owners Manual

OM_R_0809RevB

CHAPTER 12: REAR WHEELS

Rear Wheel Spacers

I   

WARNING

Never use rear wheel spacers with the Adjustable Camber System.  

If you ignore this Warning, you may fall, tip over 

or lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair.

Adjusting Rear Wheel Spacing

I   

WARNING

Make sure you use the same spacers on both sides of the chair.  Do not use spacers exceeding a total of 3/4”.  If 
more than 3/4” of the axle sleeve is outside of the camber plug, the axle sleeve could disengage from the camber plug 
while you are using the chair. 

 If you ignore this Warning, you may fall, tip over or lose control of the wheelchair and 

seriously injure yourself or others or damage the wheelchair.

Tools required:

•  7/8” Open End Wrench

•   3/4” Open End Torque Wrench

1.  Place the 7/8” open end wrench onto the camber plug and use the 3/4” open end torque wrench to remove the 

axle sleeve.  See Figure 12-5.

 

Note: If you have only one washer and do not have a lock washer, your rear wheel spacing package will include a 
lock washer.  Always use a lock washer.

2.  Add or delete the spacers you need to increase/ decrease your rear wheel spacing, keeping the two washers 

against the head of the axle sleeve.

3.  After you have adjusted your rear wheel spacing, reinstall the axle sleeve in the camber plug and hand-tighten.
4.  Using a torque wrench, tighten the axle sleeve to 230 inch-pounds.

Figure 12-5

Rear Wheel Spacing

1/8”
Spacer

Camber Tube

Axle
Sleeve

Camber Plug

Lock Washer

1/2”
Spacer

1/4”
Spacer

Содержание Aero R
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды