Ti Lite Aero R Скачать руководство пользователя | Manualshive

Страница: 60 / 95

background image

7-1

Aero R Owners Manual

OM_R_0809RevB

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

Velcro

®

-Style Adjustable Back Upholstery

Note: When adjusting the tension of the back upholstery, DO NOT apply so much tension that the backrest tubes are

pulled out of vertical. If this occurs, you may cause the chair to “track” improperly or to develop a “floater.”

Adjusting the Tension

1. Lift the back flap to expose the backrest ears. See Figure 7-1.

2. Completely detach the two backrest ears from the padded back, but do not remove them from the backrest.
3. Adjust to the desired tautness. The closer together the two backrest ears, the more taut the padded back will be.

The farther apart the two backrest ears, the looser the padded back will be. Tighter back upholstery will increase
the stability and maintain normal maneuverability of the chair because the user is pushed forward slightly. Looser
back upholstery will increase maneuverability, but will make the chair more prone to tip over backward because
additional weight is being distributed behind the rear wheels.

4. Align the top of the padded back with the two backrest ears to ensure that the top of the back upholstery is even

with the top of the backrest.

5. If desired adjust the tension of the strap(s).
6. Securely attach the padded back to the backrest ears using the Velcro

®

-style material and lower the back flap

back into position in front of the rigidizer bar.

Figure 7-1

Adjusting Back Upholstery

Rigidizer Bar

Padded Back

Backrest Ears

Back Flap

Backrest

Straps

Replacing

1. Lift the back flap to expose the backrest ears. See Figure 7-2.

2. Completely detach the two backrest ears and strap(s) from the padded back and remove them from the backrest.

Note: If your chair has integrated or fold-down push handles, you will need to remove the bolts that secure the
backrest ears to the backrest (using a 1/8” Allen Wrench) and the bolts that secure the backrest posts inside the
backrest (using a 5/32” Allen Wrench). See Figure 7-3 and see “Adjusting the Backrest Height” on page 4-3.

3. Remove the seat cushion.

4. Detach the bottom flap from the seat upholstery.

5. Attach bottom flap of the new back upholstery to seat upholstery.

6.  Install the two new backrest ears on the backrest.
7.  Adjust to the desired tautness. See “Adjusting the Tension” on page 7-1.
8.  Align the top of the padded back with the two backrest ears to ensure that the top of the back upholstery is even

with the top of the backrest.

9. Reinstall the strap(s) and adjust to the desired tautness.

10. Securely attach the padded back to the backrest ears and lower the back flap back into position in front of the

rigidizer bar.

11. Replace the seat cushion.

«
...
58
59
60
61
62
...
»

Содержание Aero R
































































































Отзывы:

Нет отзывов

Похожие инструкции для Aero R

Бренд: C.T.M. Страницы: 16

Бренд: Otto Bock Страницы: 8

ATLANTIS PR46070

Бренд: Able 2 Страницы: 2

DC-HY3510L-WH-GG

Бренд: Flash Furniture Страницы: 2

Бренд: Shoprider Страницы: 28

Бренд: VARILITE Страницы: 68

Бренд: SORG Страницы: 36

Бренд: Quickie Страницы: 88

Бренд: Veigel Страницы: 36

LY-ESA120 HERO3

Бренд: Comfort Страницы: 32

Бренд: identités Страницы: 13

PHYSIPRO Standard tray

Бренд: identités Страницы: 16

Бренд: Unicare Health Страницы: 12

Бренд: panthera Страницы: 2

Бренд: Karma Страницы: 32

Бренд: Vermeiren Страницы: 12

Бренд: Vermeiren Страницы: 176

Бренд: Orliman Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды