background image

5

PLACEMENT OF THE IW-B7 AND IW-C7

A home theatre system includes three loudspeakers placed across the front of the listening 
room. The distance between the left and right speakers determines the width of the stereo 
image. If the speakers are placed too close together, the image will be too narrow; too far apart 
and the blend will suffer, creating a hole in the middle. When properly placed, your speakers 
will create a continuous “virtual image” from left to right, with an illusion of sound outside, in 
front of, and behind the speaker systems.

We recommend an angular separation between 45 degrees and 60 degrees (when viewed from 
above). This is equivalent to a separation between the speaker systems that is about 85% of the 
distance to either of the speakers.

Creation of sounds between the speakers 
requires some precise placement. The 
distance from the left speaker, right 
speaker, and center channel to the 
listener location should all be as equal as 
possible. We advise using a tape measure 
to equalize these two distances to the 
primary listening location. 

Ideally the front channel speakers should 
be installed at the same height as the 
ears of a seated listener. Try to keep the 
front channel tweeters within two verti-
cal feet of that height. 

45°-60° 

IW-C7

IW-SR30

IW-B7, C7 and IW-SR30.indd   5

IW-B7, C7 and IW-SR30.indd   5

7/18/08   12:38:13 PM

7/18/08   12:38:13 PM

Содержание Snell IW-B7













Отзывы: