17
Installation of Base Terminal
1
Select a suitable location inside the wheelhouse or the cabin room where you desire to place your Base
Terminal. It is designed to operate in rooms with a temperature range from -15 °C to +55 °C.
2
Mount your Base Terminal onto a wall or place it on a desk or tabletop.
3
In case of mounting the Base Terminal onto a wall, fix the screw 1 to 4 by spacing out 3.55mm. Fix it in
the proper position using the Wall mount paper and mount the BDU onto a wall. Then tighten SCREW 5
together with the WASHER.
NOTE
The terminal must be installed within the area where the ground can be connected via a separate port in the
terminal.
Washer
Screw 5
Ground connector
Wall mount paper
The mounting location hole (unit: mm)
Screw type: 5 mm x 20 mm Stainless steel tapping screw
