12
Base Terminal
Introduction of Ports
SOS Button
SOS Button
For emergency usage. To notify pre-configured contacts during an emergency. Press
and hold the RED key for 2 seconds to trigger the alert.
SAT Port
Grounding Stud
GPS Port
DC Input
GPIO Port
Extension Port
Grounding Stud
To ground the terminal with a grounding cable.
SAT Port
SAT ANT port is used for the physical connection - via an RF cable between the satellite
active Antenna unit and the Base Terminal.
GPS Port
GPS ANT port is used for the physical connection between the GPS antenna and the
Base Terminal.
DC Input
Power input connector is used for connecting the external power source (10.8 – 31.5 V)
to the Base Terminal and active antenna.
GPIO Port
GPIO_1 is used for connecting external button switches to pin 1 and 2 as input port. It
can be set as SOS or General and when set to SOS it functions like the SOS button on the
keypad. GPIO_3 is used for connecting buzzer or external device to pin 5 and 6 as output
port. (Pin 5 8V output and Pin 6 GND) When set to Buzzer, the buzzer will sound when
the phone rings and when the alert sounds. When set to General, the server receives a
separate control command and outputs 8V according to the control command.
