Thuraya FDU-XT, Руководство пользователя

Страница: 5 / 15

ㅣ
9 8
ㅣ
3.3. Installing the GPS Antenna
The GPS antenna comes with an attached coaxial cable to connect to the
FDU-XT unit.
1. Find an appropriate location to mount the antenna.
Make sure the antenna has a clear view of the sky.
2. Mark locations of the “screw holders” on the surface/rooftop for fixing the
antenna.
3. Drill holes of adequate depth on the surface.
4. Keep the antenna in place so that the drilled holes and the screw holders
line up.
5. Fix the antenna securely using the screws provided.
6. Connect the free end of the attached cable to the GPS antenna connector
marked “GPS” on the reverse side of the FDU-XT.
Maintain a distance of 0.5 to 1 meter between the GPS and SAT antenna.
3.4. External Accessories
In order to use the FDU-XT, a Thuraya XT-series satellite phone with an active
SIM-card is required. In addition the following external devices can be used with
the FDU-XT:
1. Analogue extension phone
2. Selected Group3 fax machines with fax software for PC-fax
3. PC or laptop for data transfer and PC-fax
Note
The RJ-11 cable should be 2-wire inner at both ends.
Note
4. Getting Started
The FDU-XT is intended to be used as a desktop or wall-mounted phone while
the Thuraya handset is docked. Slots are provided at the base of the unit to allow
The FDU-XT to be hooked securely to a wall. Interfaces for connecting external
equipments such as Group 3 fax machines and PCs are provided at the back
side of the unit.
1. Do not connect FDU-XT with other products such as PSTN or a general telephone line.
Attention
4.1. External Connections