Page 3
For technical questions, please call 1-888-866-5797.
Item 68738
10. Panel must be connected using UL listed outdoor
rated wire of the correct thickness (gauge) for the
amperage rating and length (see warning number
9 also). Follow the guidelines in the chart below:
Current
in Amps
Maximum Length
5'
10'
15'
20'
25'
0-5
18
6-7
18
16
8
18
16
10
18
16
11-12
16
14
15
14
12
18
18
16
20
14
12
10
22-24
12
30
16
14
10
Minimum Wire Gauge
11. Install an appropriate charge controller/regulator
to regulate output and prevent damage. Do not
attach panel to battery or power grid without proper
regulator, inverter, and/or charge controller.
12. Install and use according to applicable
National Electrical Code (NEC) standards.
13. This panel is not rated for use as fire-resistant
roofing. If installing on a roof, install only over a fire
resistant roof covering rated for the application.
14. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
15. Install only according to these instructions.
Improper installation can create hazards.
16. Wear ANSI-approved safety goggles and heavy-
duty work gloves during installation. Do not
wear jewelry or metal watches when working
near solar panels, wiring or batteries.
17. Handle panel with care. Glass may break or a
sharp edge may be exposed during movement.
18. Keep installation area clean and well lit.
19. Install out of reach of children.
20. Keep bystanders out of the area during installation.
21. Do not install when tired or when under
the influence of drugs or medication.
22. Use in 12 VDC systems only.
Battery Precautions
1.
Wear splash-resistant ANSI-approved
safety goggles and electrically insulated
gloves while working near batteries.
2.
Use an appropriate charge controller
whenever connected to battery.
3. Charge, store, and maintain batteries
according to supplier’s instructions.
Service Precautions
1.
Before service, maintenance, or cleaning:
a.
Dry solar panels and outdoor
wiring thoroughly while wearing
electrically insulated gloves.
b.
Cover all solar panels with an opaque
cover, such as a blanket.
c.
Disconnect all solar panels.
d.
Disconnect all batteries.
2.
Do not service during rain, fog, or
any other wet/humid weather.
3.
Do not stand on or otherwise
apply pressure to panel.
4. Do not allow children to play with or
near this or electrical components.
5. Inspect at least monthly; do not use if damaged,
parts are loose, water is found inside the
housing, electrical insulation is cracked or
damaged, or connections are loose.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE
INSTRUCTIONS.
Specifications
Max. Input Wattage
360 Watt (for 12V panel)
Max. Input Voltage
50V
Max. Input Amps
30A
Rated Output
12VDC
Overcharge Voltage
14.5V + 0.4V
Note:
Output will decrease as the panel gets hotter
than room temperature (~70° F). Angle, solar intensity,
cloud cover and other factors will effect output.
