5
1
earth terminal point
The safety earth terminal point for the 240 Volt inverter.
2
positive Connection Jumper leads
(Sold Separately)
12 Volt 400 Amp. Once the Thunder Weekender jumper leads are connected.
3
negative Connection Jumper leads
(Sold Separately)
12 Volt 400 Amp. Once the Thunder Weekender jumper leads are connected.
4
Master switch
12 Volt 400 Amp. The main control switch for all the 12 Volt outputs, including the
jumper cable connections. (Please note master switch does not control 240 Volt charging).
5
240 Volt inverter Control switch
Power switch activating the 240 Volt inverter.
The green LED indicates system output is good, red indicates system overload.
6
240 Volt power socket
10 Amp, 240 Volt pure sine wave inverter connection, 300 Watt continuous,
400 Watt max output for 1 second with automatic overload protection.
7
usb socket
5 Volt 2.0 Amp.
8
usb Control switch
Power switch activating the USB socket. The green LED indicates USB output is active.
9
240 Volt battery Charger input
Direct connection plug for the supplied 6 Amp, 7 stage Thunder battery charger.
10
50 amp anderson plug Connection
12 Volt with 50 Amp automatic reset circuit breaker. Can be used as an auxiliary output or a
charge input (refer to the “Charging your battery in the Thunder Weekender” section of this manual).
11
standard accessory socket x 2
12 Volt, with 15 Amp automatic reset circuit breaker per socket.
12
Merit accessory socket x 2
12 Volt, with 15 Amp automatic reset circuit breaker per socket.
Thunder Weekender Specifications
