7
• With the battery connected, and the master switch (4) turned ON, the
Weekender display will be activated once the ON/OFF button (18) is pressed.
• To save power the LED screen will turn off after 60 seconds. Pressing the
ON/OFF button (18) again will turn the screen back on for another 60 seconds.
• There are four buttons below the LED display that enable the user
to control and select battery options; up arrow (21), down arrow (20),
OK (19), ON/OFF (18).
• The first selection required is battery type (13). Select from GEL, LEAD ACID,
CALCIUM, AGM by scrolling through the four options using the up arrow
(21) and down arrow (20) buttons. Once the desired battery type option is
displayed, press the OK button to confirm your selection.
• Once the battery type is selected, the monitor will display the battery
Amp hour options (16).
• The available options are between 60 and 140 Ah. Any of these options can
be selected by scrolling through the options using the up arrow (21)
and down arrow (20) buttons.
• If your battery’s Amp hour rating is between two possible options
on the Weekender LED display (for example your battery is 105 Ah
and available are 100 Ah or 110 Ah) it is recommended to select
the next highest Amp hour rating available.
• Press the OK button to confirm your selection.
Your Weekender is now ready to use.
operating the led display
battery type
13
battery Voltage
14
output Current
15
battery amp hour
16
remaining
power
percentage
remaining time
(hours)
17
22
display
on/off
ok
down
up
18
19
20
21
How To Use The Thunder Weekender
