THUNDER LASER
MINI-60
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
48
U move
Axis reset+
Manual Set+
Laser Set+
Origin set+
Set Fact Para
Def Fact Para
Auto Focus
L
IP setup+
Diagnoses
+
Screen
Z move
Press up and down arrow keys to move the green block to the anticipant item, and then
push the “Enter” key to display the sub menu.
4.6.7 Z Move
When the green block is on “Z Move” item, to move the Z-axis table up and down by press
left and right arrow keys, then press ESC to go back to normal x & Y axis control.
4.6.8 U Move
When the green block is on “U Move” item, to move the Z-axis table up and down by press
left and right arrow keys,
4.6.9 Axis Reset+
When the green block is on this item, push the “Enter” key to show as below:
X axis reset
Y axis reset
Z axis reset
U axis reset
XY axis reset
Press up and down arrow keys
to move the cursor to one of the entry, then push “Enter”
