THUNDER LASER
MINI-60
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
35
4.2 ON/OFF Switch
Switches the mains and the laser supply power ON/OFF.
The following conditions must be fulfilled for correct start up:
- Unrestricted freedom of motion of the mechanics
- No materials under the engraving table
- Protection covers closed
- When turn on the power of machine, and note that turn on the main switch first and then
the laser supply power.
If all covers are closed, immediately after being switched on, the device starts the
referencing process. When the referencing process is completed correctly, an acoustic
signal sounds and the device is ready for operation. The operation panel will display the
home screen when the laser is completed resets.
Before switching on the device, the user must make sure that no objects of
any kind are located inside the operating space, which could limit or obstruct the
mechanics of the device.
Tips
: When switching off the mains supply, all processing data is lost.
4.3 How to use the TL-Timer
TL-Timer is an additional tool for laser machines.
It will control laser machines periphery like exhaust fan, air-values, warning lights,
pneumatic lifts, electrical locks and lost of other stuff automatically.
This will increase the ease of use of your laser machine.
Please note the different types of connection, which makes the TL-Timer able to work with
each kind of laser controller.
Operation:
Normal use:
The TL-Timer gets activated by a control signal from laser controller. For this case the red
LED lights up and all 4 relays will be activated until the signal from controller gets turned
off. Without control signal the 4 relays will stay turned on until a given delay time has
