READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING
MOUNTING LOCATION:
The enclosure mounts in the rear drivers' side, behind
back seat firing to the side in the Ford Focus hatchbacks.
TOOLS REQUIRED FOR INSTALLATION:
Powered Screwdriver
#2 Phillips Head Bit
6" Bit Holder Extension
Wire Cutters
5/16" Wrench
Trim Panel Removal Tool
INSTALLATION:
Follow the steps below
1.
Attach the included mounting hardware to your enclosure as shown below.
2.
Using the supplied screws, attach the included speaker grill to prevent dam-
age from cargo.
3.
Remove floor mat from rear of hatch area. Remove trim screw by the cargo
light and place included upper bracket over the hole and replace the screw.
4.
If you are using an external amplifier, skip to step 21.
For technical assistance call 1-800-CALL MTX.
These instructions are guidelines only and in no way are intended to replace a
professional installation. As always before screwing or drilling check to make sure
you will not damage any wires or hoses or cause damage to the vehicle.
Warning:
Batteries normally produce explosive gases which can cause personal
injury. Therefore, do not allow flames, sparks or lighted substances to come near
the battery. When charging or working near a battery, always shield your face and
protect your eyes. Always provide ventilation.
Conventional Wiring of Aftermarket Radio
_
+
20 Amp Fuse
Low Level Signal
Turn On Lead
20
A
PW
R
G
N
D
RE
M
EB
C
INPUT
RI
G
H
T
LE
FT
G
AI
N
X-
O
VE
R
ST
AT
US
Optional EBC
(Electronic Bass Control)
1
6
