manualshive.com logo in svg

Thumpstar TSE12, Руководство пользователя

Поделиться
Скачать
Thumpstar TSE12 Скачать руководство пользователя страница 29

26

Repair and Maintenance

TEST BRAKE

- Squeeze brake and hold.

- Push the Balancer forward. The rear wheel should not spin if the brake is 

adjusted properly.

- If rear wheel spins when pushing forward or the lever engages 

prematurely, refer to “Adjust Brake”

ADJUST BRAKE

-  To adjust brake cable:

   

- Twist brake lever adjust in or out, ¼ to ½ turn at a time, until  

 

   

desired brake adjustment is attained.

   

- If the brake still needs further adjustment, proceed to step 2.

- Determine if brake cable loose or brake rotor is dragged on brake pad or 

not:

   

- Loosen brake hubs barrel adjuster.

   

- Adjust brake hub adjuster in or out until the desired brake 

   

adjustment is attained.

   

- Lock brake hub barrel adjuster.

   

- Perform final adjustment of tension in brake cable with brake  

 

   

lever barrel adjuster.

   

- Repeat “Test Brake” section above. 

     WARNING: 

Test and practice breaking in an open area free 

from obstacles, in a straight line, until the child is familiar with the brake 

function.

Содержание TSE12






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды