5 Technical
specifications
Bed base:
90 x 200 cm
Lowest position of bed
base
40 cm
Highest position of bed
base
80 cm
Overall dimensions
105 x 214 cm
Idle weight
Bed:
84 kg
Lifting pole:
6,4 kg
Side rails:
9 kg
Accessories: 0,25 kg
Maximum permitted load:
Bed
Max. weight of the user:
135 kg
mattress 20
kg
accessories 15
kg
Total
170
kg
Lifting pole and triangle grip: 80 kg
Maximal load of the lifting
pole:
Maximum load total
80 kg
170 kg
Heaviest sections of the
bed:
Head/foot of the bed
Weight : 20 kg
Dimensions:
815 x 105 x 65 mm (Mantovani)
845 x 105 x 75 mm (Haydn)
Back section :
70° (see figure 5)
Fig. 5 : Angles of the bed base
Foot section :
0-30° thigh section (see figure 5)
0-20° leg section : 5 notched
stages (see figure 5)
Electrical category
Class II
Noise level
Less than 65 dB
Maximum permitted
mattress height:
12 to 18 cm (MILANO side rails)
12 to 19 cm (PARIS side rails)
Mattress dimensions:
90 x 200 cm
6 Assembling the bed
The bed must be assembled, used and dismantled only by well-trained, expert personnel. Look at figure 1
and follow these instructions.
Once the bed has been assembled, follow the checking instructions described in chapter 8.
6.1
Assembling the bed
There are several ways to assemble the bed depending the experience of the assembling person, the
ground and the necessary amount of physical strength. The following method is the easiest way considering
the physical strength.
Pay attention while assembling, that you treat the bed parts carefully. Place them carefully on the floor, to
avoid damaging the drives.
A. Place the head part of the bed against a wall and block the two castors by applying the brakes.
B. Stick the bed base of the head end and the head part together.
C. Ensure that the butterfly screws are fastened tight.
D. Position the foot part of the bed against a wall and block the two castors by applying the brakes.
E. Stick the bed base of the foot end and the foot part together.
F. Ensure that the butterfly screws are fastened tight
.
G. Release the brakes and push the foot and the head parts of the bed together.
H. Push both parts completely together and tighten firmly the butterfly bolts.
32
