Thrush Aircraft S2R-T660, Руководство по обслуживанию

Страница: 174 / 300

THRUSH AIRCRAFT INC - T660 TURBO THRUSH
AIRCRAFT MAINTENANCE MANUAL
7 - 11
Effective: 01/10/05
ELEVATOR REMOVAL
A. Disconnect aft push tube from elevator horns.
B. Disconnect the trim tab push rod at elevator trim-tab.
C. Remove hardware attaching both of the elevators horns together.
D. Remove all hinge bolts from leading edge of elevator.
E. Remove the elevator from aircraft.
ELEVATOR INSTALLATION
A. Position elevator on aircraft.
B. Attach the elevator to the horizontal stabilizer.
C. Bolt the two elevator horns together.
D. Connect aft push tube to elevator horns.
E. Connect trim-tab push rod at elevator trim.
ELEVATOR RIGGING
The aft push tube will have to be disconnected from elevator horns for adjustment.
A. Set the forward stop on the control stick so the stick is approximately seven inches from the hopper
when in full forward position.
B. Set the elevator to its full down travel of 17 (±1) degrees and adjust the aft end of push tube at
the elevator horn to match that position. Connect push tube to elevator horn.
*NOTE *
Assure the inspection hole in the rod end is covered by the
push tube threads. It may be necessary to let the control
stick come back slightly to achieve coverage.
** CAUTION **
Rigging of the elevators will require that tail gear be checked for
proper operation. See Section VI, Landing Gear.