8
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair
it yourself. Contact a qualified appliance repair technician if the product requires servicing.
Care and Cleaning Instructions
1. Unplug and allow unit to cool at least 10 to 15 minutes before cleaning.
2. Wash the measuring cup, oil spoon, pop-corn scoop in warm, soapy water. Rinse and dry thoroughly.
3. Frequently empty the catch tray of unpopped popcorn kernels and clean with soap and water.
Dry thoroughly
CAUTION:
Do not wash in dishwasher.
4. Let the unit cool down before cleaning. Disassemble the kettle, stirrer and lid for cleaning. With a
clean damp cloth clean the kettle surface inside and out.
5. Do NOT use any acidic, citrus based cleaners or abrasive cleaners on the acrylic surfaces as they
might cause scratching or dullness.
4. Wipe the housing clean and dry with a soft dry cloth.
5. Never immerse the kettle in water or other liquid or place in the dishwasher.
6. Do not scour surfaces with steel wool or abrasive cleaners.
7. Frequent cleaning of the popcorn kettle is strongly recommended. This will help prevent burning of
excess oils on the bottom of the kettle.
To thoroughly clean the popcorn kettle, turn off the unit and add about a cup of water into the kettle
(no detergent is necessary). Place a towel in the bottom of the main unit and place a large bowl
or container on the towel (the container must be large enough to easily pour water from the
popcorn kettle). Turn ON the Pop (Stirrer & Kettle Heater) switch and bring the water to boil for
1 to 2 minutes. Turn OFF and carefully pour the water from the popcorn kettle to the bowl
or container.
CAUTION:
Kettle and water will be HOT! Repeat same procedure 2 to 3 times for best results.
Storing Instructions
1. Unplug unit and allow to cool.
2. Clean the unit as instructed and let dry thoroughly.
3. Store fully assembled with kettle lid in place.
4. Store in its box or in a clean, dry place.
5. Never wrap cord tightly around the appliance. Do not put any stress on cord where it enters unit,
as this could cause cord to fray and break.
