•
Do not allow the chassis to touch any metal parts, such as the frame of an equipment
rack. This might create a parallel ground path that could degrade the sound of your
system.
•
Connect the
turntable to your phono stage or Step-Up Transformer
•
Connect the power supply to the power source indicated on the voltage selector
card (visible by the main fuse), either 115 or 230 volts AC.
You may select what voltage to
use by means of the removable selector card located behind the fuse in the power
connectors. Remove the card and reinstall so that the desired voltage may be read
; be
certain to change the fuse to the correct value. Connect the power supply to the power
source indicated on the rear panel. Avoid power conditioners that float the ground pin.
ALWAYS connect power cord to component before plugging it into an AC outlet, and
make sure that unit's power switch is set to the "OFF" position before making the final
connection. For best performance, try to route the power cord away from signal cables.
6
Yatrus is operated using a single knob -
џ
Use the power knob to select the appropriate speed for the record being played.
џ
Follow your tonearm manufacturer’s instructions for lowering and raising the needle.
џ
Turn the knob back to the OFF position to stop the turntable.
OPERATION
O
FF
O
FF
O
FF
Содержание Yatrus
Страница 7: ...NOTES ...
