Chapter 4: Using the web interface
98-126882-B
Handling SMS messages
54
Handling SMS messages
Sending an SMS message
To send an SMS message
from
the terminal, do as follows:
1.
Click
MESSAGES
from the left navigation pane.
This page contains new incoming messages.
2.
In the left navigation pane, click
Write message
.
3.
Type in the message in the
Write new message
field.
If the message text is too long for one SMS, the message is sent as two or more SMS
messages. The field below the message field shows the number of SMS messages used to
send the message.
4.
Type in the phone number in the
Recipient
field.
Remember
00
and
country code
(e.g.
00 45
to call Denmark or
00 1
to call USA).
Important
If the terminal is not online when you attempt to send a message, the message is
moved to the Outbox in stead of the Sent folder. Messages in the Outbox are
not
automatically sent when the terminal goes online. For further information on the
Outbox, see the next section,
Options for messages in the Outbox
.
To make sure a message has been sent, check that it has been moved to the Sent
folder.
