7
T-Cube Laser Source
apt™ software (supplied) allows the user to get up and running in a short space of
time. Advanced custom applications and sequences are also possible using the
extensive ActiveX® programming environment also supplied. This programming
library is compatible with many development tools such as LabView, Visual Basic,
Visual C++, C++ Builder, LabWindows/CVI, Matlab and Delphi.
See Section 2.3. for a full description of the APT system software.
In the remainder of this handbook, the Tutorial section (Chapter 5) provides a good
initial understanding on using the unit, and the reference section (Chapter 6) covers
all operating modes and parameters in detail.
2.2 T-Cube Controller Hub
As a further level of convenience when using these controllers, Thorlabs also offers
the new K-Cube Controller Hubs (KCH301 and KCH601). This product has been
designed specifically with multiple T-Cube operation in mind in order to simplify issues
such as cable management, power supply routing, multiple USB device
communications and different optical table mounting scenarios.
The Controller Hub comprises a slim base-plate type carrier (375mm x 86mm x
21.5mm, 14.75” x 3.4” x 0.85”) with electrical connections located on the upper
surface to accept up to six T-Cubes.
Internally the Controller Hub contains a fully compliant USB 2.0 hub circuit to provide
communications for all six T-Cubes – a single USB connection to the Controller Hub
is all that is required for PC control. The Controller Hub also provides power
distribution for up to six T-Cubes, requiring only a single power connection.
