22
HA0164T Rev F Feb 2018
Chapter 4
Display Settings
The display can be set to show the laser output in mW, mA
or dBm.
If mW is selected, the display shows the laser output power.
If mA is selected, the display shows the laser current.
If dBm is selected, the display shows the laser output power
in dBm.
(The dBm mode uses a 1mW reference, i.e. 0dB = 1mW).
Press the MODE button to select the display mode.
If required, the display setting can also be ‘persisted’ so that
it is saved between power up cycles. Press and hold the
MODE button to persist the setting.
Note.
The current setting is indicated by a dash on the right
hand side of the display.
Press the MODE button to proceed to the Adjustment
Settings.
