THORLABS Thorlabs MDFM-MF2, Инструкция по сборке, Страница: 6 / 11

Olympus MF2 Filter Cube Assembly Manual
21396-D02 Rev A, August 27, 2010 Page 6 www.thorlabs.com
Step 8
Reassemble the filter cube by placing the half of the assembly with the mounted dichroic mirror into the
empty half. Align the two halves using the two assembly screw holes. Slowly tighten the assembly
screws, alternating between them, until snug. Caution: Do not over tighten the assembly screws, as
doing so may strip the threads or screw heads. At this point the dichroic mirror should be facing the
exciter side of the filter cube (see Figure 7).
Figure 7. Looking into the exciter side of the filter cube
Step 9
Orient the filter cube so the emitter side
is facing up. Place the emission filter
into the mount with the filter arrow facing
up, away from the mount. Carefully
thread the retainer ring (lip side down)
onto the cube.
Figure 8. Installing the emission filter
Reflective
(Coated) Side
Retainer
Ring
Emission
Filter