THORLABS Thorlabs MDFM-MF2, Инструкция по сборке

Страница: 4 / 11

Olympus MF2 Filter Cube Assembly Manual
21396-D02 Rev A, August 27, 2010 Page 4 www.thorlabs.com
Step 3
Remove the emitter side of the filter cube and orient so the emitter port is facing down as shown in
Figure 3. Loosen the two screws holding the dichroic mirror retainer clip. Do not remove the screws.
Figure 3. Loosening the dichroic mirror retainer clip
Step 4
The MDFM-MF2 Filter Cube holds a standard set of Thorlabs MDF Series Dichroic Mirror, Emission,
and Excitation Filter Set, sold separately. The MDF-CY3.5 Filter set is shown in Figure 4.
Figure 4. Dichroic mirror set
The emission and excitation filters can be easily differentiated by the thickness of the filter mount rings:
emission (3.5 mm) and excitation (5.0 mm). Note that the dichroic mirror has a coated and an uncoated
side (see Figure 5).
Loosen
Screws
Emitter Side
Dichroic Mirror
Retainer Clip
Excitation
Filter
Emission
Filter
Dichroic
Mirror