THORLABS SL1325-P16, Руководство по эксплуатации

Страница: 4 / 19

Swept Source Laser
14138-D02 Rev F 04/17/09 Page 3 of 18
1.2. Safety and Warnings
WARNING High Voltage!
Before applying power to your system, make sure that the protective conductor of
the 3 conductor mains power cord is correctly connected to the protective earth
contact of the socket outlet. Improper grounding can cause electric shock resulting
in severe injury or even death!
Make sure that the line voltage rating agrees with your local supply and that the
appropriate fuses are installed. Fuses should only be changed by qualified service
personnel. Contact Thorlabs for assistance.
Do not operate without cover installed. To avoid electrical shock the power cord
protective grounding conductor must be connected to ground. Refer servicing to
qualified personnel.
NOTE: Thorlabs provides the proper power input cable with each system for use in the United States. If using this
unit anywhere else, the user will need to supply a properly grounded power cable to power the unit.
Attention!
Do not obstruct air-ventilation into the bottom of the swept source engine or out of
the exhaust fan on the rear of the unit!
Mobile telephones, cellular phones or other radio transmitters are not to be used
within the range of three meters of this unit since the electromagnetic field
intensity may exceed the maximum allowed disturbance values according to
EN50082-1.