THORLABS SL1325-P16, Руководство по эксплуатации

Страница: 13 / 19

Swept Source Laser
14138-D02 Rev F 04/17/09 Page 12 of 18
2.6. Electrical Interfaces
The SLXXXX-P16 should only be connected to an external electrical power source that has the proper value as
stated on the backside of the unit, see Figure 5.
Figure 5: The AC input voltage must be 100-240 VAC and 50-60 Hz
.
Electrical Outputs
Figure 6: Rear View of the Swept Source OCT System
The SLXXXX-P16 has the following electrical outputs at the back panel (see Figure 6):
•
BNC output “TRIGGER” - generates a TTL signal for the tuning scan.
• BNC output ”MZI OUT” - Sinusoidal trigger pulse – see Figure 3 above.
This is the interference signal from the
MZI .