5
ScienceDesk Workstation
3.3.2 Passive Mounts
Equipment Required:
Levelling device (e.g., bubble level)
Foot pump (automobile tire type)
A Installation
1) Ensure the frame is level – see Section 3.1.
2) Remove the dust caps from the schraeder valves – see Fig. 3.4
Fig. 3.4 Passive anti-vibration mount
3) Fit the lifting handles supplied to the breadboard as shown in Section 3.3.1.
4) Observing the warnings listed above, lift the breadboard into position.
Note
The desk is normally supplied with the anti-vibration mounts and breadboard already fitted. Steps (2) to (6) are applicable
only if the unit has been air-freighted or shipped to its destination.
Warning
During item (3):
When lifting breadboards, use the lifting handles supplied.
Safe lifting precautions must be observed. In particular, do not lift more than 25 kg (55 lb) per person.
Use more people as necessary.
Breadboards should be lifted only in an unpopulated condition.
A
