THORLABS LNR502E, Руководство пользователя

Страница: 7 / 45

Rev A Apr 2020
Page 5
Chapter 3 Installation
3.3.2 Mounting to the Work Surface
Referring to Fig. 3.1, proceed as follows:
1) Turn the motor knob to position the moving carriage central in its range of travel, and ensure that the mounting holes in the
base are clearly visible through the holes in the top plate.
2) Fit the dowels supplied to the base plate (LNR50P1).
3) Position the stage on the base plate, ensuring that the dowels locate correctly in the holes in the lower surface of the stage.
4) Fit two bolts (M6 x 12 or 1/4-20 x 1/2”, not supplied) through the holes in the top plate and into the base plate. Tighten to
secure the stage in place.
Fig. 3.1 Fitting the base plate
5) Fit three bolts (M6 or 1/4-20, not supplied) through each end of the base plate to fix the stage to the work surface.
6) To remove the base plate, reverse the procedure above.
Mounting holes
(2 at each end of
platform travel)
2
1
1
3
4
5