THORLABS LNR502E Скачать руководство пользователя страница 30

Страница: 30 / 45

Page 28

ETN053047-D02

LNR502E Encoded Long Travel, Linear Stage with Stepper Motor Actuator

Chapter 8 Thorlabs Worldwide Contacts

Thorlabs verifies our compliance with the WEEE (Waste Electrical and Electronic Equipment) directive of the European Community

and the corresponding national laws. Accordingly, all end users in the EC may return "end of life" Annex I category electrical and

electronic equipment sold after August 13, 2005 to Thorlabs, without incurring disposal charges. Eligible units are marked with the

crossed out "wheelie bin" logo (see right), were sold to and are currently owned by a company or institute within the EC, and are not

dissembled or contaminated. Contact Thorlabs for more information. Waste treatment is your own responsibility. "End of life" units

must be returned to Thorlabs or handed to a company specializing in waste recovery. Do not dispose of the unit in a litter bin or at a

public waste disposal site.

USA, Canada, and South America

Thorlabs, Inc.

56 Sparta Avenue

Newton, NJ 07860

USA

Tel: 973-300-3000

Fax: 973-300-3600

www.thorlabs.com

www.thorlabs.us (West Coast)

Email: [email protected]

Support: [email protected]

Europe

Thorlabs GmbH

Hans-Böckler-Str. 6

85221 Dachau

Germany

Tel: +49-(0)8131-5956-0

Fax: +49-(0)8131-5956-99

www.thorlabs.de

Email: [email protected]

France

Thorlabs SAS

109, rue des Côtes

78600 Maisons-Laffitte

France

Tel: +33 (0) 970 444 844

Fax: +33 (0) 825 744 800

www.thorlabs.com

Email: [email protected]

Japan

Thorlabs Japan, Inc.

3-6-3 Kitamachi,

Nerima-ku, Tokyo 179-0081

Japan

Tel: +81-3-6915-7701

Fax: +81-3-6915-7716

www.thorlabs.co.jp

Email: [email protected]

UK and Ireland

Thorlabs Ltd.

1 Saint Thomas Place, Ely

Cambridgeshire CB7 4EX

Great Britain

Tel: +44 (0)1353-654440

Fax: +44 (0)1353-654444

www.thorlabs.de

email: [email protected]

Support: [email protected]

Scandinavia

Thorlabs Sweden AB

Bergfotsgatan 7

431 35 Mölndal

Sweden

Tel: +46-31-733-30-00

Fax: +46-31-703-40-45

www.thorlabs.com

Email: [email protected]

Brazil

Thorlabs Vendas de Fotônicos Ltda.

Rua Rosalino Bellini, 175

Jardim Santa Paula

São Carlos, SP 13564-050

Brazil

Tel: +55-16-3413 7062

www.thorlabs.com

Email: [email protected]

China

Thorlabs China

Room A101, No. 100

Lane 2891, South Qilianshan Road

Putuo District

Shanghai 200331

China

Tel: +86 (0) 21-60561122

Fax: +86 (0)21-32513480

www.thorlabschina.cn

Email: [email protected]

Содержание LNR502E














































Результаты поиска

Содержание LNR502E

Отзывы:

Бренды по названию

Популярные бренды

THORLABS LNR502E, Руководство пользователя

Результаты поиска

Содержание LNR502E

Отзывы:

Бренды по названию

Популярные бренды