THORLABS LC1 - USB, Руководство по эксплуатации

Страница: 31 / 40

LC1 – USB / USB 2.0 CCD Line Camera / page 32
3.6.
Collecting Event Driven Data using Ext. Trigger Mode
The LC1-USB provides the ability to capture and record data triggered by a specific
event by enabling Ext. Trigger Mode. A 50 Ohm TTL compatible trigger input is
provided via a standard BNC connector.
To activate Ext. Trigger Mode, open the System Set-Up dialog from the System
menu and click on "External trigger mode".
Once Ext. Trigger Mode has been activated, the LC1-USB will only scan when the
trigger signal is applied to the trigger input.
4.
Troubleshooting
4.1.
In the Win2000 and XP Operating System
The USB device driver file WINDRVR6.SYS must be located in
C:\WINNT\system32\drivers. For Win2000 and XP systems, the driver files
WINDRVR6.INF and THORLABS.INF must be located in C:\WINNT\INF. You must
have administrator privileges to install and run the LC1-USB application
(“spectra.exe”).
When the driver software is installed via the CDROM menu program, the driver files
should install automatically without operator interaction. In some circumstances, the
LC1-USB Installer program may request the path of one or more of the driver files. In
this case, browse to the CDROM directory "\USB\driver" and select the file