THORLABS LC1 - USB Скачать руководство пользователя страница 38

Страница: 38 / 40

LC1 – USB / USB 2.0 CCD Line Camera/ page 39

Warranty

Thorlabs

GmbH

warrants material and production of the USB 2.0 CCD Line Camera

for a period of 24 months starting with the date of shipment. During this warranty

period

Thorlabs GmbH

will see to defaults by repair or by exchange if these are

entitled to warranty.

For warranty repairs or service the unit must be sent back to

Thorlabs GmbH

(Germany

)

or to a place determined by

Thorlabs GmbH

. The customer will carry the

shipping costs to

Thorlabs GmbH

in case of warranty repairs

Thorlabs GmbH

will

carry the shipping costs back to the customer.

If no warranty repair is applicable the customer also has to carry the costs for back

shipment.

In case of shipment from outside EU duties, taxes etc. which should arise have to be

carried by the customer.

Thorlabs GmbH

warrants the hard- and software determined by

Thorlabs GmbH

for

this unit to operate fault-free provided that they are handled according to our

requirements. However,

Thorlabs GmbH

does not warrant a faulty free and

uninterrupted operation of the unit, of the soft- or firmware for special applications nor

this instruction manual to be error free.

Thorlabs GmbH

is not liable for consequential

damages.

Restriction of warranty

The warranty mentioned before does not cover errors and defects being the result of

improper treatment, software or interface not supplied by us, modification, misuse or

operation outside the defined ambient conditions stated by us or unauthorized

maintenance.

Further claims will not be consented to and will not be acknowledged.

Thorlabs

GmbH

does explicitly not warrant the usability or the economical use for certain

cases of application.

Thorlabs GmbH

reserves the right to change this instruction manual or the technical

data of the described unit at any time.

Содержание LC1 - USB








































Результаты поиска

Содержание LC1 - USB

Отзывы:

Бренды по названию

Популярные бренды

THORLABS LC1 - USB, Руководство по эксплуатации

Результаты поиска

Содержание LC1 - USB

Отзывы:

Бренды по названию

Популярные бренды