Rev
L
Jun
202
1
Page 9
Chapter 4 Operation
6) Click the arrow to the right of the window and select your actuator type (e.g. HS
BSC FW103 Filter Wheel) from the list displayed.
Fig. 4.2 Select Actuator Settings Window - 2
7) Click OK.
8) The server reads in the stage and controller information automatically.
Refer to the handbook for the associated controller for more information on driving
the actuator/stage.
Note
To ensure correct operation, it is important to select the correct stage and axis type.
If using a BSC20x series controller, select the ‘HS BSC FW103’ option.
If using a KST101 controller, select the ‘HS TST FW103’ option.
If using a legacy BSC0xx or BSC10x controller, or a TST001 K-Cube driver, choose
the option without the ‘HS’ prefix.
Selecting an incompatible stage/axis type could result in reduced velocity and
resolution.
