THORLABS EDFA100P, Руководство по эксплуатации

Страница: 4 / 22

Fiber Amplifier Chapter 2: Safety
TTN118382-D02, Rev A, November 18, 2016 Page 4
Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply when the
unit is operated correctly.
SHOCK WARNING
High voltage inside. To avoid electrical shock, before powering the unit on, make sure that the
protective conductor of the 3-conductor power cord is correctly connected to the protective earth
contact of the socket outlet. Improper grounding can cause electric shock resulting in severe injury
or even death. Do not operate without cover installed.
WARNING
This unit must not be operated in an explosive environment.
LASER WARNING
Avoid Exposure
– Invisible Laser Radiation Emitted from Apertures. Do not look into the amplifier
input or output apertures and avoid skin exposure to the laser radiation from the output aperture.
Injury to the eye or skin may result.
Laser radiation is emitted from the output port when the unit is powered on, even if there is no
optical input supplied to the amplifier. Laser radiation is emitted from the output port when a light
source is connected to the input port, even if the amplifier is powered off.
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
The unit is supplied with a region-specific power cord. If using your own power cord, make sure it is IEC 320
compatible.
Make sure that the line voltage rating marked on the rear panel agrees with your local supply and that the
appropriate fuses are installed. Changing of the mains fuse can be done by the user (see Section 4.2, Changing
the Fuse). With the exception of the mains fuses, there are no user serviceable parts in this product.
Do not operate in wet or damp conditions. Do not obstruct the air ventilation slots in the housing!
This device can only be returned when packed into the complete original packaging, including all foam packing
inserts. If necessary, ask for a replacement package.
Mobile telephones, cellular phones, or other radio transmitters should not to be used within the range of three
meters of this unit since the electromagnetic field intensity may exceed the maximum allowed disturbance values
according to EN50082-1.