THORLABS DCC1 45 Series Скачать руководство пользователя страница 85

Страница: 85 / 420

DCx camera

Capture errors

This group box provides detail information on errors that occurred during an image capture process:

Error

Description

API no destination
memory

There is no destination memory for copying the finished image.

API conversion failed

The current image could not be processed correctly.

API image locked

The destination buffers are locked and could not be written to.

DRV out of buffers

No free internal image memory is available to the driver. The image was
discarded.

DRV device not
ready

The camera is no longer available. It is not possible to access images
that have already been transferred.

USB transfer failed

The image was not transferred over the USB bus.

DEV timeout

The maximum allowable time for image capturing in the camera was
exceeded.

ETH buffer overrun

Not applicable to USB cameras.

ETH missed images

Not applicable to USB cameras.

Possible cause

Remedy

Not enough destination memory allocated
or all destination buffers locked by the
application

Reduce the frame rate so that there is more time to
process the filled destination memory

Internal error during internal processing of
the image

All destination buffers locked by the
application

Reduce the frame rate so that there is more time to
process the filled destination memory

The computer takes too long to process the
images in the A

(e.g. colour conversion)

Reduce the frame rate so that there is more time to
process the filled image memory of the driver
Disable

resource-intensive

API

image

pre-

processing functions (e.g. edge enhancement,
colour correction, choose smaller filter mask for
software colour conversion)

The camera has been disconnected or
closed

Not enough free bandwidth on the USB bus
for transferring the image

Reduce the pixel clock frequency
Operate fewer cameras simultaneously on a USB
bus
Check the quality of the USB cabling and
components

The selected timeout value is too low for
image capture

Reduce the exposure time
Increase the timeout

Содержание DCC1 45 Series





































































































































































































































































































































































































































Результаты поиска

Содержание DCC1 45 Series

Отзывы:

Бренды по названию

Популярные бренды

THORLABS DCC1 45 Series, Руководство пользователя

Результаты поиска

Содержание DCC1 45 Series

Отзывы:

Бренды по названию

Популярные бренды