THORLABS DCC1 45 Series Скачать руководство пользователя страница 349

Страница: 349 / 420

344

DCx camera

Error

Description

118

IS_INVALID_DEVICE_ID

The device ID is invalid. Valid IDs start from 1 for
USB cameras.

119

IS_INVALID_BOARD_ID

The board ID is invalid. Valid IDs range from 1
through 255.

120

IS_ALL_DEVICES_BUSY

All cameras are in use.

122

IS_TIMED_OUT

A timeout occurred. An image capturing process
could not be terminated within the allowable
period.

125

IS_INVALID_PARAMETER

One of the submitted parameters is outside the
valid range or is not supported for this sensor or is
not available in this mode.

127

IS_OUT_OF_MEMORY

No memory could be allocated.

139

IS_NO_USB20

The camera is connected to a port which does not
support the USB 2.0 high-speed standard.

140

IS_CAPTURE_RUNNING

A capturing operation is in progress and must be
terminated before you can start another one.

145

IS_IMAGE_NOT_PRESENT

The requested image is not available in the
camera memory or is no longer valid.

148

IS_TRIGGER_ACTIVATED

The function cannot be used because the camera
is waiting for a trigger signal.

151

IS_CRC_ERROR

A CRC error correction problem occurred while
reading the settings.

152

IS_NOT_YET_RELEASED

This function has not been enabled yet in this
version.

153

IS_NOT_CALIBRATED

The camera does not contain any calibration data.

154

IS_WAITING_FOR_KERNEL

The system is waiting for the kernel driver to
respond.

155

IS_NOT_SUPPORTED

The camera model used here does not support
this function or setting.

157

IS_OPERATION_ABORTED

The dialogue was cancelled without a selection so
that no file could be saved.

158

IS_BAD_STRUCTURE_SIZE

An internal structure has an incorrect size.

159

IS_INVALID_BUFFER_SIZE

The image memory has an inappropriate size to
store the image in the desired format.

160

IS_INVALID_PIXEL_CLOCK

This setting is not available for the currently set
pixel clock frequency.

Содержание DCC1 45 Series





































































































































































































































































































































































































































Результаты поиска

Содержание DCC1 45 Series

Отзывы:

Бренды по названию

Популярные бренды

THORLABS DCC1 45 Series, Руководство пользователя

Результаты поиска

Содержание DCC1 45 Series

Отзывы:

Бренды по названию

Популярные бренды