THORLABS CC215MU Скачать руководство пользователя страница 4

Страница: 4 / 41

Compact Scientific Digital Cameras

Chapter 1: Safety

Rev A, June 3, 2020

Page 1

Chapter 1

Safety

1.1.

Precautions

Please read the instruction manual carefully before operating your Digital Camera. All statements regarding safety
and technical specifications will only apply when the unit is operated correctly.

Refer to this User’s Guide whenever the following symbols are encountered on the Digital Camera and Power
Supply.

ATTENTION

This symbol indicates that additional information is available in this user guide.

This equipment is intended for laboratory use only and is not certified for medical applications,

including but not limited to, life support situations.

Transportation and delivery may cause the Digital Camera to be warm or cool upon receipt.

Please wait for the device to reach room temperature before attempting to operate.

WARRANTY WARNING

Do not open the Digital Camera. There are no user serviceable parts in this product. Opening the

device will void your warranty. Any modification or servicing of this system by unqualified

personnel renders Thorlabs free of any liability. This device can only be returned when packed into

the complete original packaging, including all foam packing inserts. If necessary, ask for

replacement packaging. Please contact Thorlabs’ Technical Support at

[email protected]

and a member of our team will be happy to assist you.

CAUTION

This product is powered directly from the USB 3.0 port of a host computer (not included), and from

an auxiliary AC-DC power supply (included). To ensure optimal performance and the safety of the

user, the host computer must use a properly grounded UL Listed or Recognized AC-DC power

supply (or comparable regulatory approvals).

Dangerous voltage exists within the power supplies. Do not tamper with or open the supplies under

any circumstances. Doing so may expose lethal voltage to personnel and will void the warranty of

the computer and the camera.

Содержание CC215MU










































Результаты поиска

Содержание CC215MU

Отзывы:

Похожие инструкции для CC215MU

Бренды по названию

Популярные бренды

THORLABS CC215MU, Руководство пользователя

Результаты поиска

Содержание CC215MU

Отзывы:

Похожие инструкции для CC215MU

Бренды по названию

Популярные бренды