Compact Scientific Digital Cameras
Chapter 10: Regulatory
Rev A, June 3, 2020
Page 35
10.2. FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment
under FCC rules.
10.3. Auxiliary I/O Cable Requirements
The Digital Camera is not supplied with a cable for connecting to the AUX I/O port of the camera. This cable is
application specific in all cases due to varying lengths and functions that are used. If an Auxiliary I/O cable is to be
used with this camera it must be constructed with the requirements shown in Section 3.7.3 in order for the camera
to adhere to CE and FCC compliance.
