THORLABS BSC202 Скачать руководство пользователя страница 60

Страница: 60 / 76

Appendix E

Motor Control Method Summary

The 'Motor' ActiveX Control provides the functionality required for a client application

to control one or more of the APT series of motor controller units.
To specify the particular controller being addressed, every unit is factory programmed

with a unique 8-digit serial number. This serial number is key to the operation of the

APT Server software and is used by t he Server to e numerate and communicate

independently with multiple hardware units connected on the same USB bus. Th e

serial number must be specified using the HWSerialNum property before an ActiveX

control instance can communicate with the hardware unit. This can be done at design

time or at run time. Note that the appearance of the ActiveX Control GUI (graphical

user interface) will change to the required format when the serial number has been

entered.
The Methods and Properties of the Motor ActiveX Control can be used to perform

activities such as homing stages, absolute and relative moves, and changing velocity

profile settings. A brief summary of ech method and property is given below, for more

detailed information and individual parameter descriptiond please see the on-line help

file supplied with the APT server.

Methods

CalibrateEnc

Calibrates encoder equipped stage.

DeleteParamSet

Deletes stored settings for specific controller.

DisableHWChannel

Disables the drive output.

DoEvents

Allows client application to process other activity.

EnableHWChannel

Enables the drive output.

GetAbsMovePos

Gets the absolute move position.

GetAbsMovePos_AbsPos

Gets the absolute move position (returned by value).

GetBLashDist

Gets the backlash distance.

GetBLashDist_BLashDist

Gets the backlash distance (returned by value).

GetCtrlStarted

Gets the ActiveX Control started flag.

GetDispMode

Gets the GUI display mode.

GetEncCalibTableParams

Gets the en coder calibration table parameters for

encoder equipped stages.

GetEncPosControlParams

Gets the en coder position control pa rameters for

encoder equipped stages.

GetEncPosCorrectParams

Gets the encoder position correction parameters for

encoder equipped stages.

GetHomeParams

Gets the homing sequence parameters.

Содержание BSC202













































































Результаты поиска

Содержание BSC202

Отзывы:

Похожие инструкции для BSC202

Бренды по названию

Популярные бренды

THORLABS BSC202, Руководство пользователя

Результаты поиска

Содержание BSC202

Отзывы:

Похожие инструкции для BSC202

Бренды по названию

Популярные бренды