THORLABS BSC202 Скачать руководство пользователя страница 10

Страница: 10 / 76

HA0278T Rev H Dec 2016

Chapter 2

2.2.4

APT Server (ActiveX Controls)

ActiveX Controls are re -usable compiled software components that supp ly both a

graphical user interface and a pro grammable interface. Many such Co ntrols are

available for Windows applications development, providing a large range of re-usable

functionality. For example, there are Controls available that can be used to

manipulate image files, connect to the intern et or simply pro vide user in terface

components such as buttons and list boxes.
With the APT system, ActiveX Controls are deployed to allow direct control over (and

also reflect the status of) the range of electronic controller units, including the BSC203

stepper motor controller. Software applications that use ActiveX Controls are often

referred to as 'client applications'. Based on ActiveX interfacing technology, an

ActiveX Control is a l anguage independent software component. Consequently

ActiveX Controls can be in corporated into a wide range of softwa re development

environments for use by client application developers. Development environments

supported include Visual Basic, Labview, Visual C++, C++ Builder, HPVEE, Matlab,

VB.NET, C#.NET and, via VBA, Microsoft Office applications such as Excel and Word.
Consider the ActiveX Co ntrol supplied for a Stepp er Motor Drive Card fitted to a

BSC203 APT stepper controller unit (one panel is displayed for each channel (card)

fitted.

This Control provides a complete user graphical instrument panel to allow the motor

unit to be manually operated, as well as a complete set of software functions (often

called methods) to allow all parameters to be set a nd motor operations to be

automated by a client application. The instrument panel reflects the current operating

state of the controller unit to which it is associated (e.g. such as motor position).

Updates to the p anel take place automatically when a user (client) application is

Содержание BSC202













































































Результаты поиска

Содержание BSC202

Отзывы:

Похожие инструкции для BSC202

Бренды по названию

Популярные бренды

THORLABS BSC202, Руководство пользователя

Результаты поиска

Содержание BSC202

Отзывы:

Похожие инструкции для BSC202

Бренды по названию

Популярные бренды