THOR T2161XBIN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 12

5
Changing the (circular) charcoal filter (re-circulating only):
To ensure best performance of your extractor, you should replace the charcoal filters every four to six months,
depending on use.
Please note the charcoal filter cannot be washed.
To attach a new charcoal filter, follow the steps below:
1. Remove the cover panel (acrylic filter model) or grease filter (aluminium filter model) as described above.
2. Place the charcoal filter on the centre of the motor support, and once firmly located turn the charcoal
filter clockwise 90º until the charcoal filter locks into position.
3. Replace the cover panel or grease filter that has been removed.
Changing the Light
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT . AL LOW IT TO
COOL BEFORE REMOVING IT .
Remove the cover panel as described above, unscrew the light bulb and replace the light with the required
light bulb as shown in the table below. Finally, replace the cover panel.
Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.
The light is designed for use during cooking and not for general room illumination. Extended use of the light
can reduce the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating. Bulbs of a lower
power rating may be adequate for use, generally last longer and use less energy.
Spare bulbs are available from THOR Customer Care or from your local DIY shop.
T2161XBIN
E14 LED 4Wx1 DR-4-H-E14-37
Table 1