background image

2

Important

The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. 
Please  note  that  the  manufacturer  reserves  the  right  to  invalidate  the  guarantee  supplied  with  this  product  following 
incorrect installation or misuse of the appliance or use in a commercial environment. 

This  appliance  is  not  designed  to  be  used  by  people  (including  children)  with  reduced  physical,  sensorial  or  mental 
capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use 
the appliance by someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified 
personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist  THOR Customer Care in the event of a 
fault with your appliance and to register your appliance for guarantee purposes.

  Appliance Model

  Serial Number

CE Declarations of Conformity:

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Gas 
safety, Electrical safety (LVD) and Electromagnetic interference compatibility (EMC).

 

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 
2002/96/EC.

At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer 
providing appliance recycling services.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health. It 
also enables the constituent materials to be recovered, saving both energy and resources.  As a reminder of the need to 
dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. 

 

Please note:

   Under no circumstances should the extractor be connected to any gas ventilation system, flue system or hot air  

 

 

ducting system.

 

Do not vent the extractor into an attic or loft space.

   Only house the extractor in rooms with adequate ventilation.  Remember that the extractor is powerful and  

 

 

whatever air is extracted needs to be replaced.

   Do not tile the extractor in. It should be removable for service or maintenance.  

   Do not use silicone sealant to secure the hood to the wall.

   You must be able to isolate the extractor from the mains electrical supply after installation.

   This extractor has been designed to be used in a room with a volume of less than 36 m

3

.

   Steam cleaners must not be used when cleaning this appliance.

    The performance of your extractor will vary depending on a number of factors.  These include: type of extraction,  

 

length of ducting, room volume, ventilation available and cleanliness of the filters.

Содержание T2161XBIN













Отзывы: