background image

OPERATION DESCRIPTION:

2

•  The operator must wear slip-resistant safety shoes and protective clothing—including 

    goggles and helmet. For long-time operation, operator must wear earplugs.
•  While operating the post driver, maintain balance of body—the user should stand in front 

    of air filter to operate the machine. 
•  After starting the machine, do not carry out one-handed operation.
•  While lifting the machine, be careful not pull throttle switch— carry, only,  in idle-speed.
•  Keep non-staff away from operating area to avoid injury.
•  Select the medium speed to operate pile driver.
•  Keep the handle dry and clean free from greasy oil or fuel mixture.
•  If operation is stopped midway, for any reason, be sure to turn off the engine.
•  Before use, be sure to check fastening screws of the connector are properly tightened. 

    (If it’s loose, it’s necessary to tighten the screws before use).
•  Pure gasoline (without two-stroke engine oil) is prohibited. Compound it according to the 

    recommended ration of fuel on 

(page 3)

, for use.

•  Gasoline is highly flammable—important, replenish fuel in a well-ventilated environment. 

    During fuel filling, gasoline engine MUST be turned off.
•  Do not add too much oil—the oil should not exceed the neck of oil filer of fuel tank. If fuel 

    spills over, wait until the fuel volatilizes completely and then start the machine.
•  During work, check whether fuel tank is damaged and frequently leaking—and check the 

    oil lid, tighten properly. 

    (If damage is found, close down the operation immediately for replacement).
•  Remove hazardous materials such as, oil containers, gas cans or open flame from 

    work area.
•  While post driver is used in closed areas such as tunnels, trenches and deep groove, 

    take precaution to ensure air circulation is adequate, to avoid gas fume poisoning.
•  Avoid quick acceleration or braking, so as not to damage the machine.
•  Before transport, empty fuel tank to avoid leakage and accidental fires.
•  Non-professional maintenance is prohibited—avoid disassembling post driver to avoid 

    structural damage of parts, shortened service life of post driver.

Содержание MS-PD1002















Отзывы: