Maintenance Service and Trouble Shooting
3) Resonance of tubing and loosening of parts
Improper and compact laying of tubes or the loosening of parts may cause vibration
and noise
4) Inspection method
To find the sources of noise ,press the vibration spot with your hand while the
refrigerator is in operation and listen attentively whether the vibration becomes weaker
or vanishes .If the refrigerator has not been levelly placed ,put a level meter on its top
table and adjust the leveling screws on its legs .In case noise occurs from the
compressor ,strike different locations on the side surface of its case using a rubber
hammer or hand hammer with a wood block in-between so as to determine whether the
suspended springs are out of balance or being seized .
List of parts
1. Stainless steel Door 2.Stainless Steel Handle
3. Display Control panel 4.Display shelf
5. Roll-Out Wood Shelves 6.Lock
7. Adjustable Feet