4
•
Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
•
Only operate the product in ambient temperatures between
5°C and 40°C.
•
Only use the product in environments where 2.4 GHz wireless
technology is allowed.
Warning – pacemaker
•
The body current that flows when using this product can
affect the functioning of a pacemaker.
•
This product generates magnetic fields. Persons with a
pacemaker should consult a doctor before using the prod-
uct, as the pacemakers proper function could be affected.
5. Introduction
These 2.4-GHz digital wireless headphones with DAB+ and FM
receiver operate with the latest wireless technology and allow
you to enjoy clean, crystal-clear music or TV sound in the entire
home. Simply connect the transmitter to the desired audio
source; DVD player, CD player, TV set, hi-fi system, iPod or
smartphone. Furthermore, you are able to receive digital radio
programmes directly on the headphones using the DAB+ stand-
ard and FM radio signals, or transmit these radio signals to a
further source (for example, stereo system or active speakers).
6. Main functional features
•
2.4-GHz digital wireless technology
•
Automatic and digitally encoded channel selection for the
wireless transmission
•
Automatic switch-off ends the transmission if no signal is
transmitted (or in charging mode).
•
Range up to 10-15 metres (depending on building character-
istics), up to 30 m with a clear line of sight
•
Transmitter as a headphones stand with reverse polarity
protection when charging
•
Analogue or digital signal input and output selection
•
Smart Volume Memory (storage of the last volume setting)
•
Mute switch
•
DAB+/FM radio with three direct favourites buttons on the
transmitter
•
LED display that shows the radio stations and additional
information or source selection
•
Remote control for controlling primary features
•
Direct audio line-in (headphones in passive mode, connected di-
rectly to a smartphone/MP3 player, for example; for mobile use)
•
Can also be used as wired headphones
7. Getting started
7.1 Connecting the transmitter
•
Connect the power supply unit to a properly installed and
easily accessible mains socket and to the DC input socket
(
17
) on the transmitter.
•
Connect one of the included audio cables (RCA or optical
fibre cable) to the
[ANALOG] (14)
or
[OPTICAL] (12)
audio
input on the rear of the transmitter and to the corresponding
audio output on your playback device (TV or audio source).
•
Set the
[SELECT]
input selector switch (
13
) to the input you
are using
(OPTICAL/ANALOG)
.
•
If you want to use the radio signals (DAB+ or FM) on a
further device (for example, stereo system or active speakers),
you can forward these signals using the
DAB OUTPUT
(via
RCA) (
16
) or optical fibre cable (
15
) as illustrated (
Fig. 4
).
You may need additional connection cables for this purpose.
7.2 Inserting the batteries (headphones) (Fig. 5)
Warning
•
When inserting the rechargeable batteries, always make
sure that the polarity is correct (“+” and “-” markings).
Failure to do so could result in the rechargeable batteries
leaking or exploding.
•
Do not allow batteries/rechargeable batteries to dis-
charge completely.
•
Do not tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
•
Do not short circuit the batteries/rechargeable batteries
and keep them away from uncoated metal objects.
•
The batteries and charging station included in the
delivery go together and should always be used in
combination.
Note – Batteries
•
Switch off your device before changing the batteries.
•
When stored over a long period of time, batteries should be
charged regularly (at least every three months).
•
The batteries may be charged at any time; it is not neces-
sary to discharge them completely before charging.
•
Before using the device for the first time, you must insert the
supplied batteries into the headphones and fully charge them
(takes about 7 hours).
•
Open the battery compartment cover by holding the rear
side of the right earpiece (
21
) and carefully turning the right
earpad anti-clockwise.
(Fig. 5)
•
Insert the two AAA batteries (supplied) into the battery
compartment, observing correct polarity. Close the battery
compartment properly by putting back the earpad and turn-
ing it clock-wise until you feel it snap into place.
(Fig. 5)
7.3 Charging the headphones
•
First switch off the headphones by pressing and holding the
Power button (19)
for about 2 seconds
(Fig. 6)
. The red
LED signal lights up.
•
Switch on the transmitter using the
POWER button (11)
and wait until the display (
9
) switches to ‘
Auxiliary Input
’.
•
Hang the headphones with the charging contacts (
22
) on the
charging contacts (
1
) of the transmitter.
Содержание WHP5407
