En
g
lis
h
5
2.0 Your rEcEIvEr
2.1 dEFAuLt PIn: 0000
2.2 Front Panel
Fig. 1
1.
iR Sensor
Receives commands from the remote control
2.
LED Display
Shows channel number and time in standby
3.
Mode indicatorLED
RED indicates that the receiver is in STANDBY mode. GREEN
indicates that the receiver is in OPERATING mode.
4.
q
Switches the receiver ON or into Standby
5.
USB
To connect your USB storage device.
2.3 rear Panel
Fig. 2
1.
ANT iN
To connect to your antenna for reception of broadcast
signals.
2.
ETHERNET
To connect to your Ethernet cable (RJ-45) for RSS feeds and
weather forecasts
3.
HDMi
To connect your receiver with your TV-set using an HDMI
cable.
4.
S/PDiF coaxial
To connect your receiver to a digital home cinema set, AV
receiver or digital audio amplifier.
5.
TV ScART
To connect your receiver with your TV-set using a SCART
cable.
6.
Power cord
Your receiver requires a supply voltage of 220 – 240 V AC
(Auto-selectable), 50/60Hz +/-5%. Please ensure the local
power specification meets these requirements before
connecting your receiver to the wall outlet.
7.
Power switch
To power your receiver ON or OFF
2.4 remote control
Fig. 3
1.
q
Switches the receiver On/Standby.
Quick press: passive standby – enables quick start-up. Long
press (more than one second): active standby - longer
start-up time
2.
!
Mutes all audio outputs of the receiver
3.
FAV
Opens the favourite group selection.
4.
LiST
Call the current channel list.
5.
AUDiO
Opens the audio* language selection
6.
9
One step back in menu or back to previous channel.
7.
cOLOUR BUTTONS
In different menus for specific functions
8.
Opens the current channel information; 2x opens the current
event information and 3x the next event information.*
