4
1.3 Equipment Set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
- Refer to the user manual of your TV and, if applicable, your antenna.
- Make sure that the HDMI cable and, if applicable, outdoor components are in a good condition.
- If you use the TV SCART connection, use a well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The following symbols
will serve as follow.
Warning:
Indicates warning information.
Tips
Indicates any other additional important or helpful information.
MENU
Represents a button on the remote control or the receiver.
(Bold characters)
Move to
Represents a menu item within a window.
(Italic characters)
1.4 Accessories
- Installation instructions
- 1 remote control unit
- 2x batteries (AAA type)
Warning:
The batteries should not be recharged, disassembled, electrically
short-circuited, be mixed or used with other types of batteries. If
rechargeable accumulators instead of batteries are going to be used
(e.g. NiMH), we recommend using types with low self-discharge to
ensure long time operation of your remote control.
1.5 usage of external uSB devices
- It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible to USB
2.0 specifications, recording, playback and other multimedia functions of the receiver might not
work properly.*
- To ensure best performance of your USB storage device please format it via your receiver (through
the menu “
Multimedia
”) to FAT32 system. Other file systems are not all supported by the receiver.
However, it is possible to use already NTFS formatted disks.
- STRONG cannot guarantee compatibility with all types of USB storage devices.
- If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max.5 V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
- Playback of files cannot be guaranteed although extensions are listed, as it depends on codec, data
bit rate and resolution used (all MPEG codec formats are supported).
- It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver. STRONG
will not take responsibility for any loss of information or circumstances caused by loss of information.
* This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed.
